News:

The veneer hot press needs to be cleaned regularly in the working process, which can effectively prolong the service life of its hot press to a certain extent. Therefore, it is necessary to clean the hot press regularly. Before cleaning the veneer hot press, the staff should prepare cleaning tools, turn off the power supply of the equipment at the same time, and the hot press surface also needs to be cleaned, which will also prolong its service life. When cleaning, it is necessary to check the oil injection part of the equipment in time to see if there is any oil leakage. Before production every day, check whether there is any abnormal situation in the veneer hot press.

The veneer hot press is very good for temperature control in the practical application process, and its temperature sampling frequency can get 0.1 seconds, which can meet the needs of each user.

Choosing suitable connection mode and sealing element of veneer hot press plays a very important role in heat transfer under high temperature and high pressure. Most of the connection pipes of veneer hot press plate are some hoses, which are very convenient to connect. Most of our enterprises are mainly metal hoses, of course, some enterprises adopt imported Teflon hoses, which can use flanges in both ways. Teflon hoses have higher fatigue resistance than metal hoses. Asbestos rubber sheet is traditionally used as gasket material, and some new materials, such as polytetrafluoroethylene and wound graphite, have better sealing effect.

The veneer hot press is a very important part. In order to ensure the excellent use effect of the hot plate, the relevant application requirements should be observed. What are the specific aspects?

Hot press is a good woodworking machine, so it is necessary to choose the appropriate hot plate according to the design requirements of the equipment. If it does not match with the equipment, it will cause great wear and tear to the machine, and it should also have corresponding safety protection equipment, including protective cover, overload protection, power-off brake and so on. When operating, it must be installed and used by professional operators. Irrelevant personnel must not touch it at will, and wear labor clothes, protective goggles and earmuffs.